Wi-30E >> Table Size : 640x500mm
X/Y-axis travel : 400/300mm
Z-axis travel : 300mm
U/V-axis travel : 100/100mm
Wire Diameter Range : ø0.1~ø0.3mm
Max. Taper Angle(°) : ±22.5°(100mm)
產品介紹
High Rigidity Structure
The machine structure is designed & analyzed with CAE system, & simulation is carried out for all axis actions in the structure. The machine body design is the rigidity T type structure, to reduce work table loading & thermal deformation effects maintaining the precision of the machine.
Machine design analysis & error compensation
Work table loading & speed change
| Work table loading (kg) | Max. work table transformation (m) | |
| 1 | 100 | 8.32E-08 |
| 2 | 300 | 2.91E-07 |
| 3 | 500 | 4.16E-07 |
| 4 | 1000 | 8.32E-07 |
Features
| Maximum Workpiece Size (LxWxH) | 760x520x295 mm |
| Work Table Size | 640x500 mm |
| Maximum Workpiece Weight | 500 kgs |
| Drive & Servo | 5 axes AC Servo |
| Simulations Axis | X / Y / U / V (4 axes) |
| X/Y Axus Travel | 400 / 300 mm |
| Z Axis Travel | 300 mm |
| U/V Axis Travel | 100/100 mm |
| Wire Diameter Range | Ø 0.1~0.3 mm |
| Max. Taper Angle (°)Workpiece Thickness | ±22.5 (100 mm) |
| Maximum Axes Load | 10 kgs |
| Conductivity | Automatic |
| Water Tank Capacity | 270 L |
| Net Weight | 1950 kgs |
| Machine Layout Size(WxDxH) | 2300x2200x2150 |
ontroller Function
- 95 Servo Feed(Fuzzy)
- G94 Manual Feed
- Taper B Code: G5, G6, G7, G8, G9, G10
- Taper B Code: G01(Acceptable)
- Arc Compensation:G500, G501
- Corner Compensation:G502, G503
- Wire Consumption Compensation: G504, G505
- Hold Point Return
- Single Block
- Background Editing
- Optional Stop(M01)
- Trace Hold Point
- USB Storage
- Retrace Function
- Machining Record
- Metric / British System Switch
- Automatic Position
- Home Position Retur
- Automatic Vertical Alignment
- Parallel Compensation
- Maintenance Information
- Built-In CPU(DSP)
- Pitch Error Compensation
- Side Center Position
- Right Angle Compensation
- Dry Run
- AI S Code
- Al Corner Mode
- Al Curve ModeCorner Compensation:G502, G503
- Fly Cut
- Start Point Return
- Diagnostic Function
- Auto Corner Rounding (G48, 49, 60, 61, 62)
- Interference Cheking (3 Blocks)
- Interference Excluding (3 Blocks)
- Protection Function Whine Crashing
- Trace Start Point
- Protection Of Servo Lag
- Manual Date Input(MDI)
- Protected By Active Limit Switch
- Cutting Path Display(3D)
- Slit Position
- Chinese / English Display Switch
- Edge Position
- Z Axis Limit Setting
- Round Center Position
- Hole Center Position
- 100 Groups of Coordinate Record
- Polarity Gauge
- Control 6 Axis
File manger & preview
S-Code (AI)
Maintenance information
Generator of the temperature control